ZH

Choose Language

HOME Transmitters Multi-parameter transmitters Multifunction sensor with large electroluminescent display

Multifunction sensor with large electroluminescent display

Multifunction sensor with large electroluminescent display

CA 310

Multifunction sensor with large electroluminescent display

Kimo’s CA 310 contains a multifunction sensor with interchangeable probes and a large display. It can measure three parameters (for example humidity, temperature and pressure).

Technical specification table Operation manual Operation Manual (Simplified Version)

Alternating display of one to three parameters

One input for an interchangeable probe

Location for SPI-2 (pressure) or MVA (current/voltage) interchangeable board

Three audible and visual (dual-color LEDs) alarms

Three analogue outputs (4 wires) 0/5-10 V or 0/4-20 mA and three reverse relays

Adjustment certificate

×

Product info

Probe

Accessories

APPSoftware

Download

Compliance

MEASURE DETAILS

Units
°C, % RH, Pa, ppm, m/s, hPa, mA, V, m³/h
Alarm
3 visual and audible alarm

TECHNICAL DETAILS

Parameters
Air velocity
Airflow
Atmospheric pressure
CO
CO₂
Current
Differential pressure
Humidity
Temperature
Voltage
Displays
1-line display
IP Protection
IP 63
Standards
UKCA
2011/65/EU RoHS II
2012/19/EU WEEE
2014/30/EU EMC
2014/35/EU Low Voltage
Power supply
24 Vac/Vdc or 100-240 Vac (Active)
Outputs
3 x 0/4-20 mA or 3 x 0-5/10 V (4 wires)
Ethernet communication
No
ModBus network
No

INSTRUMENT DIMENSIONS

Length
240 mm
Width
60.5 mm
Height
120 mm
Weight
1150 g

OPERATING TEMPERATURE

Min
-10.00 °C
Max
50.00 °C

Omnidirectionnel probe SVO

Omnidirectionnel probe SVO

Air velocity hot wire probe

Air velocity hot wire probe

CO/CO2 probes

CO/CO2 probes

Temperature probes

Temperature probes

Air velocity vane probes

Air velocity vane probes

Hygrometry probes

Hygrometry probes

Transmitters and probes accessories

Transmitters and probes accessories

LCC-S

LCC-S

3D File

RoHS Certificate Reach certificate CE certificate

Related products

Multifunction transmitter
Si-C320

For clean rooms, regulated environments and industrial VAC applications where a perfect regulation/monitoring of the air parameters is needed, our Si-C320 transmitters provide reliable measurements and allow you to achieve compliance with the strictest regulations. The Si-C320 housing is waterproof, rugged and resistant to vaporised hydrogen peroxide (VHP). It also features a colour touch screen for comprehensive viewing and advanced control of measurement parameters. In addition, measurements can be recorded and downloaded via the Sauermann Control application/software. See all available models
View all
Multifunction panel transmitter
Si-CPE320

For clean rooms applications, the Si-CPE320 transmitter is flush mountable to avoid disturbing the working environment. It is equipped with a highgrade stainless-steel waterproof front panel with an integrated touch screen.
Equipped with the same technologies as the Si-C320, this panelmounted version provides state-of-the-art reliability and accuracy.
In addition, measurements can be recorded and downloaded via the Sauermann Control application/software.
Si-CPE320: Optional wireless communication module
Si-CPE320-W: Integrated wireless communication module
View all
Flush-mount display
Si-ATE320

The flush-mount displays Si-ATE320 are a good solution to integrate the visualisation of the parameters measured by other sensors/transmitters into a single display device and, simultaneously, transfer these measurements to a BMS or Scada through modbus RTU.
View all